OKGT-с (OPGW with central steel optical tube with aluminum jacket)
Application
- Used to protect the power lines of voltage 35kV and above from lightning overvoltage and for construction of optical communication systems via optical fiber.
.png "OKGT-с (OPGW with central steel optical tube with aluminum jacket)")
- Optical fiber
- Stainless steel loose tube filled with hydrophobic gel
- Aluminum jacket of steel loose tube
- Stranded aluminum clad steel wires and/or aluminum alloy wires
(8342) 473-813, 480-299
| Number of fibers | 2-24 | 24-48 |
|---|---|---|
| Nominal overall diameter, mm | from 9,2 | from 10,6 |
| Total mass of cable kg/km ** | from 200 | from 250 |
| Temperature range of operation, °C | -60… +85 |
| Temperature range of installation, °C | Not lower then -30 |
| Minimal bending radius | not less than 20 diameters |
| Lifetime | 50 years |
| Guarantee exploitation | 5 years after commissioning, no more than 5,5 years from the date of delivery |
| Tensile strength | from 13,0 kN to 500,0 kN |
| Crush strength | not less than 10kN/100 |
Advantages of OPGW:
- provides two functions at the same time: protect the power lines from lightning overvoltage and for construction of optical communication systems;
- high reliability and corrosion resistance of OPGW, extended service life due to the use of modern materials, such as aluminum clad steel wire, which is more resistant to oxidation than galvanized;
- higher permissible mechanical loads during installation and operation;
- OKGT-c with central aluminum clad steel optical tube recommended for use in areas with increased corrosive activity.