U/UTP Cat 6 PE
Application
Symmetrical communication cables are designed for operation in structured cabling systems according to the international standard ISO/IEC 11801 and in broadband access networks in the frequency range up to 250 MHz at operating voltage not more than 75 V.
- Core diameter 0,54 mm.
- Number of pairs: 4.
All LAN-cables of category 6 produced by Saranskkabel-Optika Ltd. conform to GOST R 54429-2011. The cables are delivered in cardboard boxes of 305 metres or on plywood drums with a cheek diameter of 400mm.
- Copper conductor with a diameter of at least 0.54 mm
- Polyethylene insulation with individual colour marking of each insulated conductor
- Cross-shaped separator
- PET (polyethylene terephthalate) tape
- Outer sheath (Polyethylene)
| Number of pairs | 4 | |
| Cable nominal diameter, mm | 6,0 | |
| Cable nominal weight, kg/km | 33,59 | |
| Copper conductor diameter, mm | 0,54 | |
| Maximum tensile force | ||
| Breaking force of outer sheath | ||
| Bending radius | ||
| Frequency, MHz | Up to 250 | |
| Characteristic impedance in the frequency range (1-100) MHz, Ohm | 100±15 | |
Attenuation, dB / 100m, not more than: - at a frequency of 4 MHz - at a frequency of 20 MHz - at a frequency of 100 MHz - at a frequency of 250 MHz |
3,8 8,5 19,9 33,0 |
|
NEXT, dB / 100m, not less:: - at a frequency of 4 MHz - at a frequency of 20 MHz - at a frequency of 100 MHz - at a frequency of 250 MHz |
66,3 55,8 45,3 39,3 |
|
FEXT, dB / 100m, not less: - at a frequency of 4 MHz - at a frequency of 20 MHz - at a frequency of 100 MHz - at a frequency of 250 MHz |
56,0 42,0 28,0 20,0 |
|
Return loss (RL), dB / 100m, not less: - at a frequency of 4 MHz - at a frequency of 20 MHz - at a frequency of 100 MHz - at a frequency of 250 MHz |
23,0 25,0 20,1 18,0 |
|
| Electrical capacity of pairs, not more, nF / km | 56 | |
| Insulation colour | ||
| Pair number | Wire b | |
| 1 | Blue | White blue stripes |
| 2 | Orange | White orange stripes |
| 3 | Green | White green stripes |
| 4 | Brown | White brown stripes |
Temperature range of operation, С°: -60… +60
Temperature range of installation, С°: not lower then -20
Minimal bending radius: not less than 8 diameters
Lifetime: 25 years
Guarantee exploitation: 3 years after putting in operation