F/UTP Сat 5e PE with steel rope

Application

Shielded Twisted Pair (F/UTP) with steel rope and Polyethylene sheath designed for outdoor laying by suspension and operation in structured cabling systems according to international standard ISO / IEC 11801 and broadband access networks in the frequency range up to 100 MHz at operating voltages not exceeding 75 V.

Cable outer sheath is made of polyethylene.
All Category 5e LAN cables manufactured by "Saranskkabel-Optika",Ltd. comply with GOST R 54429-2011. Cables are delivered by 305 meters in coils or on plywood drums with a diameter of 400 mm, 600 mm.

Annealed copper conductor 0.51 mm diameter (24 AWG)
Polyethylene insulation with individual color marking of each insulated core
Polyethylene terephthalate (PET) tape
Alumoflex tape and tinned copper conductor.
Steel rope
Outer sheath: Polyethylene

(8342) 473-813, 480-299

Weight and size specifications
Number of pairs	4
Nominal outer diameter of sheath over conductive core, mm	6,3 (±0,2)
Nominal outer diameter of sheath over steel rope, mm	2.5
Cable nominal weight, kg/km	49,2
Equivalent diameter to calculate the capacity per drum, mm	7,1
Mechanical characteristics
Maximum tensile force of steel rope	Not less 1,2 kN
Breaking force of outer sheath	Not less 9МPa
Bending radius	Not less than 8 diameters
Transmission characteristics
Name Value
Frequency, MHz	Up to 100
Characteristic impedance in the frequency range (1-100) MHz, Ohm	100±15
Attenuation, dB / 100m, not more than: at a frequency of 4 MHz at a frequency of 20 MHz at a frequency of 100 MHz	4,1 9,3 22,0
NEXT, dB / 100m, not less: at a frequency of 4 MHz at a frequency of 20 MHz at a frequency of 100 MHz	56,3 45,8 35,3
FEXT, dB / 100m, not less: at a frequency of 4 MHz at a frequency of 20 MHz at a frequency of 100 MHz	52,0 38,0 24,0
Return loss (RL), dB / 100m, not less: at a frequency of 4 MHz at a frequency of 20 MHz at a frequency of 100 MHz	23,0 25,0 20,1
Steam capacity, not more, nF / km	56

Color code/ Pair identification
	Insulation colour
Pair number	Wire a	Wire b
1	Blue	White blue stripes
2	Orange	White orange stripes
3	Green	White green stripes
4	Brown	White brown stripes

Cables can be operated at temperatures: - 40 °С+ 60 °С.

Checking and installation of cables should be carried out at ambient temperature - not below - 10 °С.

Bending radius of cables during installation should be at least 8 maximum outer diameters of the cable. In the process of laying, installation and operation of cables it is not allowed for moisture or soil electrolytes to get under the cable sheath through its ends.

Feeding inside the cable and/or applying substances harmful to cable elements to the cable sheath is not allowed.