OKPA – P(S)/P

Application

  • Cable OKPA is intended for laying indoors, attics, in pipes, boxes, trays, and it is also allowed to pull between buildings and supports (up to 50 m).
  • Is used in FTTx networks where the minimum geometric dimensions of the sheath and the protection of the fiber from climatic and mechanical influences are required.
OKPA – P(S)/P
  1. Optical fiber
  2. Strength element – fiberglass rod
  3. FRP rod
  4. Protective jacket
(8342) 473-813, 480-299
Number of fibers
1-4
Nominal cable dimensions, mm
5,2x2,0
Total mass of cable , kg/km
from 16
Temperature range of operation, С°
-60… +70
Temperature range of installation, С°
not lower then -10
Minimal bending radius
not less than 10 diameters
Tensile strength, kN
from 0,3
Crush strength, kN/100 mm
from 0,5